Misc Configuration - Planet FGSD-1022P User Manual

4.12.4 Misc Configuration

In this page, you can change the default configuration for the 802.1x standard:
The page includes the following fields:
Object
Quiet Period:
TX Period:
Supplicant Timeout:
Server Timeout:
Max Requests:
Reauth period:
Figure 4-12-6: 802.1x Misc Configuration interface
Description
Used to define periods of time during which it will not attempt to acquire a
supplicant.
Default time is 60 seconds.
Set the period the port waits for retransmit next EAPOL PDU during an
authentication session.
Default value is 30 seconds.
Set the period of time the switch waits for a supplicant response to an EAP
request.
Default value is 30 seconds.
Set the period of time the switch waits for a server response to an authentication
request.
Default value is 30 seconds.
Set the number of authentication that must time-out before authentication fails
and the authentication session ends.
Default value is 2 times.
Set the period of time which clients connected must be re-authenticated.
Default value is 3600 seconds.
137
User's Manual of FGSD-1022 Series