Table of Contents
Advertisement
3.2.10 Misc Configuration
Press 8 on your keyboard or use the "Tab" key to move the highlight to the Misc Configuration and press "Enter" to
access the screen of Misc Configuration from the Main Menu screen (please see the figure 3-4). Table 3-10 shows the
descriptions of the Misc Configuration screen Objects. The screen of Misc Configuration in figure 3-32 appears.
Object
Advanced Switch
Configuration
Password Setting
Reset System Default Setting
Reboot System
System Information
IP Configuration
Return to Main Menu
3.2.10.1 Advanced Switch Configuration
Press 1 on your keyboard or use the "Tab" key to move the highlight to the Advanced Switch Configuration and press
"Enter" to access the screen of Advanced Switch Configuration from the Misc Configuration screen (please see the
figure 3-32).
Figure 3-31 Bandwidth Control save successfully Screen
Figure 3-32 Misc Configuration Screen
Description
Allow user to configure the advanced Switch configuration. Please refer to chapter
3.2.10.1.
Allow user to disable or enable password protection. Set the username and
password, Maximum up to 8 characters. Please refer to chapter 3.2.10.2.
Allow user to reset the Switch to default mode. Please refer to chapter 3.2.10.3.
Allow user to reboot the Switch. Please refer to chapter 3.2.10.4.
Display the firmware and web page version. Please refer to chapter 3.2.10.5.
Allow user to set the IP address, subnet mask and Default gateway. Please refer to
chapter 3.2.10.6.
Allow return to the Console Main Menu. Please refer to chapter 3.2.10.7.
Table 3-10 Descriptions of the Switch Information screen Objects
Advertisement
Table of Contents
