Operations; Creating A Tie - Extron electronics DXP DVI Pro Setup Manual

Operations

Creating a Tie

To tie an input to an output:
1. Press and release the Esc button to clear any input button, output
button, or control button indicators that may be lit.
2.
Press and release the Video and Audio I/O buttons to select or
deselect video and audio as desired.
Green when selected
Off when deselected
Figure 11.
NOTE:
3.
Press and release the desired input button.
The button lights to indicate the selection.
Figure 12.
4. Press and release the desired output buttons.
Amber indicates a video and audio tie.
Green indicates a video-only tie.
Red indicates an audio-only tie.
Figure 13.
5. Press and release the Enter button. All button indicators turn off.
I / O
VIDEO
AUDIO
Audio and Video I/O Buttons
Audio or video can be broken away (selected, not tied)
by pressing only the Video or only the Audio button.
5
Select an Input for the Tie
3
4 8
Select an Output for the Tie
DXP DVI Pro and DXP HDMI Series • Operation
Red when selected
Off when deselected
ENTER
Green indicates the need
to confirm the change.
15