Table of Contents
Advertisement
Installing and Configuring the Edge Switch 2/32
Table 2–1: Installation Task Summary (Continued)
Task Number and Description
Task 6: Configure the Switch to the
HAFM Application
Task 7: Record or Verify HAFM Server
Restore Information
Task 8: Verify Switch-to-HAFM Server
Communication
Task 9: Configure Feature Key
(Optional)
Task 10: Configure OSMS or FICON
Management Server (Optional)
Task 11: Set Switch Date and Time
Task 12: Configure the Edge Switch
2/32 Product Manager Applications
Task 13: Test Remote Notification
(Optional)
Task 14: Back Up HAFM Configuration
Data
Task 15: Configure the Switch from the
Embedded Web Server (Optional)
Task 16: Cable Fibre Channel Ports
Task 17: Connect Switch to a Fabric
(Optional)
Task 18: Unpack, Inspect, and Install
the Ethernet Hub (Optional)
2-2
Required or Optional
Required if
Task 5: HAFM Server
(Optional)
task was done.
Required if
Task 5: HAFM Server
(Optional)
task was done.
Required if
Task 5: HAFM Server
(Optional)
task was done.
Optional—configure if a feature key is
ordered by the customer.
Optional—configure if the
server is installed.
Optional
Required
Optional
Required
Optional—if not done, then the switch
should be configured using the HAFM
server.
Required
Optional—perform this task to connect
the switch to a fabric.
Optional—install only if ordered and
Ethernet segment does not exist to
connect switches and the
server.
edge switch 2/32 installation guide
Page
2–13
2–13
2–14
2–15
HAFM
2–19
2–21
2–23
2–50
2–51
2–51
2–69
2–69
2–71
HAFM
Advertisement
Table of Contents
