Table of Contents
Advertisement
Programmer's Guide, cont'd
Command/Response Table for SIS Commands
Symbol Definitions:
= Carriage return/line feed
= Carriage return (no line feed)
•
= Space
= Escape key
Esc
Input and output numbers in commands may be entered as either 1-digit, 2-digit, or 3-digit
numbers. All input and output numbers are reported as 2-digit numbers in the response.
= Input number
X1
= Input number (for tie)
X2
= Output number
X3
= Mute, Lock mode, power supply
X4
= Numeric dB value
X5
= Audio gain
X6
= Audio attenuation
X7
= Volume adjustment range
X8
= Global preset #
X9
= Video/audio mute
X10
= Firmware version number to the
X11
second decimal place (x.xx)
= Verbose firmware version-description-upload date/time.
X12
See the Query software version (verbose) command on page 4-12.
= Name
X13
The following characters are invalid in the name: + ~ , @ = ' [ ] { } < > ' " ; : | \ and ?.
= Baud rate
X14
= Parity
X15
= Data bits
X16
= Stop bits
X17
= Port type
X18
= Voltage
X19
= Temperature
X20
4-6
CrossPoint 300 Matrix Switchers • Programmer's Guide
01 – 08
(CrossPoint 300 84/88/816);
01 – 12
(CrossPoint 300 124/128);
01 – 16
(CrossPoint 300 168/1616)
0 – maximum number of inputs (0 = disconnected)
01 – 04
(CrossPoint 300 84/124);
01 – 08
(CrossPoint 300 88/128/168);
01 – 12
(CrossPoint 300 1212);
01 – 16
(CrossPoint 300 816/1616)
(0 = off/mode 0/not OK, 1 = on/mode 1/OK, 2 = mode 2)
–18 to +24 (45 steps of gain or attenuation)
0 – 24 (1 dB/step) (default = 0 dB)
1 – 18 (1 dB/step)
0 – 64 (1 dB/step except for 0-to-1, which is 22 dB)
(default = 64 [0 dB])
0 – 32 (0 = current configuration)
0 = no mutes
1 = video mute
12 characters maximum for global preset names.
Upper- and lower-case alphanumeric characters and
_ / and spaces are valid.
9600, 19200, 38400, 115200
Odd, even, none, mark, space (only the first letter is
required)
7, 8
1, 2
0 = RS-232, 1 = RS-422
Positive or negative voltage magnitude
Degrees Fahrenheit
2 = audio mute
3 = video and audio mute
Advertisement
Table of Contents
