Extron electronics CrossPoint 300 84 User Manual page 41

5. Press and release the RGBHV button to deselect RGBHV (figure 3-25).
I/O
RGBHV AUDIO
Press the RGBHV The Audio LED
button to delesect it. remains lit to indicate
that only audio is
The LED is unlit
selected.
when deselected.
Figure 3-25 — Deselect RGBHV to view audio ties only
6. Press and release the RGBHV button and the Audio button to toggle the
RGBHV LED lit and the Audio LED unlit (figure 3-26).
I/O
VIDEO AUDIO
Press the RGBHV
Press the Audio button
button to select it.
to deselect it.
The LED lights
The LED is unlit when
when selected.
deselected.
Figure 3-26 — Deselect audio and select RGBHV to view RGBHV only
If video ties are established for input 5, the output LEDs for all video outputs
tied to input 5 light. If no ties are established for input 5, all output LEDs
return to the unlit state.
7. Press and release the View button to exit View-only mode (figure 3-27).
Press the View button
to exit View-only mode.
CONTROL
RESET VIEW
Figure 3-27 — Press the View button to exit View-only mode
The output buttons for outputs that are tied to Input 5 light to
indicate audio ties (audio breakaway).
2 3 4
OUTPUTS
The output buttons for outputs that are not tied to Input 5 are unlit.
The output buttons for outputs that are tied to input 5 light to indicate video ties
(audio breakaway).
1 2 3 4
OUTPUTS
The output buttons for outputs that are not tied to input 5 are unlit.
The View LED returns to the unlit state.
All input LEDs and output LEDs
return to the unlit state.
CrossPoint 300 Matrix Switchers • Operation
5 6 7 8
5 6 7 8
3-17