Lenovo ThinkServer TD340 User Manual And Hardware Maintenance Manual page 36

4 5 Ethernet connectors (RJ-45)
Used to attach an Ethernet cable for a LAN. Each Ethernet connector has two status LEDs to help you
identify the Ethernet connectivity, activity, and connection speed.
Note: The Ethernet connector 1 (callout
to use remote management functions, you need to connect an Ethernet cable to the Ethernet connector
1. The Ethernet connector 1 also supports teaming function. If the teaming function is enabled, the TMM
management capability will be disabled.
Figure 8. Ethernet status LEDs
Ethernet status LED
1
Right
2
Left
6 VGA DB-15 connector
Used to attach a VGA-compatible video device, such as a VGA monitor.
7 ID LED
When you press the ID button, the ID LED on the rear of the server is lit to help you locate the server among
other servers. You also can turn on the ID LED using a remote management program for server presence
detection.
ID LED
On
Off
8 Expansion card area
You server has six expansion slots on the system board for you to install appropriate PCI cards or PCI
Express cards. You also can install a converged network adapter (CNA) into the PCI Express card slot. For
detailed information, see "System board components" on page 48.
24
ThinkServer TD340 User Guide and Hardware Maintenance Manual
4 ) marked with "MGMT" is for system management. If you want
Color
Green On
None
Off
Green Blinking
Amber On
Green On
None Off
Color
Blue
None
Status
The server is connected to a LAN.
The server is disconnected from a LAN.
The LAN is connected and active.
The connection speed is 1000 Mbps.
The connection speed is 100 Mbps.
The connection speed is 10 Mbps.
The server is identified.
The ID LED is not in use or the server is not identified.
Description
Description