Replacing The Rear System Fan - Lenovo ThinkServer TD340 User Manual And Hardware Maintenance Manual

6. Touch the static-protective package that contains the new front system fan 1 to any unpainted surface
on the outside of the server. Then, remove the new front system fan 1 from the package.
7. Position the new front system fan 1 on the system fan 1 mounting area of the chassis so that the
1
three tips on the bottom of the front system fan 1 are aligned with the corresponding holes in the
mounting area. Meanwhile, ensure that the two posts
corresponding holes in the inner side of the chassis. Then, carefully slide the front system fan 1 into
the chassis until it snaps into position.
Figure 125. Installing the front system fan 1
8. Connect the new front system fan 1 cable to the system fan 1 connector on the system board. See
"System board components" on page 48.
9. If you are instructed to return the old front system fan 1, follow all packaging instructions and use any
packaging materials that are supplied to you for shipping.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the replacement, go to "Completing the parts replacement" on page 200.

Replacing the rear system fan

Attention: Do not open your server or attempt any repair before reading and understanding "Safety information"
on page iii and "Guidelines" on page 83.
This topic provides instructions on how to replace the rear system fan.
2 of the front system fan 1 are aligned with the
.
Chapter 6 Installing, removing, or replacing hardware
185