Installing Or Removing The Ethernet Card - Lenovo ThinkServer TD340 User Manual And Hardware Maintenance Manual

5. Remove any parts or disconnect any cables that might prevent your access to the memory slots.
6. Locate the memory module that you want to remove and open the retaining clips on both ends of the
memory slot. Then, grasp the memory module by its edges and carefully pull it straight up to remove it
from the memory slot.
Figure 48. Removing a memory module
7. Reinstall any parts or reconnect any cables that you have removed.
8. If you are instructed to return the old memory module, follow all packaging instructions and use any
packaging materials that are supplied to you for shipping.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the removal procedure, go to "Completing the parts replacement" on page 200.

Installing or removing the Ethernet card

This topic provides instructions on how to install or remove the Ethernet card. If you are installing or
removing any other types of supported PCI Express cards, the procedure is similar.
Note: The Ethernet card is sensitive to ESD. Ensure that you read and understand "Handling static-sensitive
devices" on page 84 first and carefully perform the operation.
Installing the Ethernet card
Attention: Do not open your server or attempt any repair before reading and understanding "Safety information"
on page iii and "Guidelines" on page 83.
This topic provides instructions on how to install the Ethernet card.
Before you begin, print all the related instructions or ensure that you can view the PDF version on another
computer for reference.
Notes:
• Depending on the specific type, the Ethernet card might look slightly different from the illustrations in
this topic.
• Use any documentation that comes with the Ethernet card and follow those instructions in addition to
the instructions in this topic.
100
ThinkServer TD340 User Guide and Hardware Maintenance Manual