Lenovo ThinkServer TD340 User Manual And Hardware Maintenance Manual page 186

8. Lift the release latch
Note: The following illustration shows the 3.5-inch hard-disk-drive cage. For the 2.5-inch hard-disk-drive
cage, the removal procedure is the same.
Figure 113. Removing the hard-disk-drive cage
9. Depending on whether your server has 2.5-inch hot-swap hard-disk-drive cages with backplanes or
3.5-inch hot-swap hard-disk-drive cages with backplanes, do one of the following:
• For the 3.5-inch hot-swap hard-disk-drive backplane, remove the four screws that secure the
backplane, and then remove the backplane from the hard-disk-drive cage.
Figure 114. Removing the 3.5-inch hot-swap hard-disk-drive backplane
174
ThinkServer TD340 User Guide and Hardware Maintenance Manual
1 and slide the hard-disk-drive cage out of the front of the chassis.