Cassette Housing - JVC GY-HD100E Service Manual

1.3.2 Cassette housing

(1) Remove the mechanism unit. (see section 1.3.1)
(2) Remove CN1 and release the motor wire. Release the lock
sideways and remove the tape guard
Fig. 1.3.2(1)
(3) Pop up the cassette housing by sliding release lever and
remove the two screws
2
Fig. 1.3.2(2)
1-4
CN1 Motor Wire
2
.
Release Lever
(4) Slide the outer unit to rear direction and lift up slightly. Pull
out to side direction to release the outer unit. Perform same
manner other side.
Fig. 1.3.2(3)
Fig. 1.3.2(4)
(5) Slide the cassette housing to the position of fig.1.3.2(5) and
hold the cassette housing slightly to inside direction to re-
lease it.
Release Position
Fig. 1.3.2(5)