Camera 1 Menu - JVC GY-HD100E Service Manual

– – – S E R V I C E M E N U – – –
C A M E R A 1 . .
C A M E R A 2 . .
V T R 1 . .
V T R 2 . .
D I P S W . .
H O U R M E T E R
E R R O R H I S T O R Y . .
O T H E R S . .
E X I T
Fig. 1-5-2 (2)
At first, while holding down the DISPLAY button, turn ON
the power switch, and then, while holding down the USER
3 button, press and hold STATUS button for more than 1
second, this MENU screen is shown on the monitor. (Refer
to Fig. 1-5-2(2))
– – – F A C T O R Y M E N U – – –
C A M E R A 1 . .
C A M E R A 2 . .
C A M E R A 3 . .
V T R 1 . .
V T R 2 . .
V T R 3 . .
D I P S W . .
H O U R M E T E R
E R R O R H I S T O R Y . .
O T H E R S . .
E X I T
Fig. 1-5-2 (3)
At first, while holding down the DISPLAY button, turn ON
the power switch, and then, While holding down the FO-
CUS ASSIST and USER 3 button, press and hold STATUS
button for more than 1 second, this MENU screen is shown
on the monitor. (Refer to Fig. 1-5-2(3))

1.5.3 CAMERA 1 menu

(1) In a service menu, place the cursor ( 3) on "CAMERA 1"
and push the SHUTTER dial to display the CAMERA1 menu.
– – – C A M E R A 1
L C D L / R R E V E R S E O F F
F A S A U D I O
A L C MO D E
E E I M A X
I R I S E N F A U T O
P I X E L C OM P E N D E T C A N C E L
P A G E B A C K
Fig. 1-5-3 (1)
(2) Rotate the SHUTTER dial to move the cursor ( 3) on the
mode to be adjusted.
(3) Push the SHUTTER dial so that the parameter blinks.
(4) Rotate the SHUTTER dial to vary the parameter.
(5) After completing the parameter setting, push the SHUTTER
dial to stop the blinking of the parameter and store the set-
ting in memory.
(6) After completing the setting, move the cursor ( 3) to "PAGE
BACK" and push the SHUTTER dial to return to the display
at the higher hierarchy level.
– – –
A U T O
A L C + E E I
1 / 2 4 0
O N
Item
LCD L/R OFF When the face of LCD screen is
turned toward the camera subject,
REVERSE
does not invert the left and right of
the LCD display. (normal image)
ON When the face of LCD screen is
turned toward the camera subject,
inverts the left and right of the LCD
display. (mirror image)
AUTO When selected FAS mode, audio
FAS
recording Level will be
AUDIO
automatically set to AUTO mode.
SW SET When selected FAS mode, audio
recording level will be depending
on switch setting.
ALC + EEI When selected ALC mode
ALC MODE
including FAS mode, EEI function
will be activated.
ONLY ALC When selected ALC mode
including FAS mode, EEI function
will not be activated.
U MODEL 1/240 Maximum shutter speed is
EEI MAX
1/480 Maximum shutter speed is
1/960 Maximum shutter speed is
E MODEL 1/200 Maximum shutter speed is
1/400 Maximum shutter speed is
1/800 Maximum shutter speed is
OFF When selected FULL AUTO mode,
IRIS ENF.
IRIS mode will be depeng on IRIS
AUTO
MODE switch of the lens.
ON When selected FULL AUTO mode,
Auto Iris mode will be activated
even Manual Iris mode is selected.
CANCEL Does not execute blemish
PIXEL
detection.
COMPEN DET
EXECUTE Execute blemish detection.
(
Table 1-5-3 (1)
White blemish detection
Open the User MENU, select "VIDEO FORMAT", "REC", set
to "HDV-HD24P" and push the SHUTTER dial.
Select "FRAME RATE", set to "24" and push the SHUTTER
dial. Select "EXECUTE", push the SHUTTER dial, then GY-
HD100 is automatically rebooted.
– – – V I D E O F O RM A T
F R A M E R A T E
R E C
A S P E C T
P B O U T P U T
P B T A P E
O U T P U T T E RM I N A L C OM P O S I T E
S E T U P
P A G E B A C K
Fig. 1-5-3 (2)
Parameter
set to 1/240 second.
set to 1/480 second.
set to 1/960 second.
set to 1/200 second.
set to 1/400 second.
set to 1/800 second.
indicates the factory setting.)
– – –
2 4
E X E C U T E
H D V - H D 2 4 P
E X E C U T E
- - - -
7 2 0 P
D V C A M
0 . 0 %
1-9