Bottom Door - HP PROBOOK 4530S Maintenance And Service Manual

Bottom door

Description
Bottom door for use in 4530s models
Bottom door for use in 4730s models
Before disassembling the computer, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
Remove the bottom door:
1. Position the computer upside-down on a flat surface with the battery bay toward you.
2. Remove the locking screw (if installed) (1) and slide the bottom door release latches (2) to
release the door.
3. Slide the door toward the front of the computer (3), and then lift the door off the computer (4).
Reverse the removal procedures to install the bottom door.
Battery on page 47).
Spare part number
646263-001
646264-001
Component replacement procedures 49