Wwan Module - HP PROBOOK 4530S Maintenance And Service Manual

WWAN module

CAUTION:
Description
HP lc2010 HSPA Mobile Broadband Module
HP un2430 EV-DO/HSPA Mobile Broadband Module
Before removing the WWAN module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the SIM (see
6. Remove the bottom door (see
Remove the WWAN module:
1. Position the computer upside-down with the battery bay toward you.
2. Disconnect the WWAN antenna cables (1) from the terminals on the WWAN module.
NOTE:
blue WWAN antenna cable is connected to the WWAN module "Aux" terminal.
3. Remove the two Phillips PM2.0×3.0 screws (2) that secure the WWAN module to the computer.
(The edge of the module opposite the slot rises away from the computer.)
56 Chapter 4 Removal and replacement procedures
The WWAN module and the WLAN module are not interchangeable.
Battery on page
SIM on page
Bottom door on page
The red WWAN antenna cable is connected to the WWAN module "Main" terminal. The
47).
48).
49).
Spare part number
632155-001
634400-001