Taking A Reading - Omron R6 Instruction Manual

3.Using the Monitor
3.2

Taking a Reading

1.
Sit comfortably, hold your arm
across your chest and relax.
2.
Press the O/I START button.
3.
Hold your arm across your chest so
that your fingers are touching the
opposite shoulder bone.
Wrist too low
Adjust the height of your wrist until the position sensor alarm
beeps slowly. When the monitor senses that your arm is in the
correct position, the wrist cuff will automatically start to inflate
and measurement starts.
Notes:
• If your wrist is too low or too high, the position sensor alarm
will emit a series of two short bleeps similar to a heartbeat.
When your wrist is at the correct position, the heart symbol
starts to blink and longer beep tones are emitted.
• Sit still and do not talk or move until the measurement is
completed.
• Keep the monitor at heart height until the measurement is
completed.
• To stop measurement, press the O/I START button at any
time during measurement.
14
Wrist too high Correct position