How To Modify The Settings; Turning The Position Sensor On/Off - Omron R6 Instruction Manual

4. How to Modify the Settings

You can modify the options for the various settings of your monitor.
This is done by pressing the SET button to select a setting, then
pressing the MEM button to select the options for that setting. After
selecting a setting, press the O/I START button to confirm the setting
and turn the power off.
4.1

Turning the Position Sensor On/Off

1.
Press the SET button until the posi-
tion sensor display (
appears on the display.
2.
Press the MEM button to select "On" or "Off".
When "On" is selected, the monitor displays the left or right
arrow symbol next to the heart symbol to indicate how close
your wrist is to the correct measuring position.
When your wrist is at the correct position the heart symbol
blinks and measurement starts.
)
EN
19