HP OmniBook 600CT Familiarization Manual page 18

Software and
Operating System
Supported Operating
Systems
Security
Laplink Remote Access for easy connection to desktop PC, network printers, and
other OmniBooks
HP PIM: Appointment book, phone book
HP financial calculator
Applications can be assigned to any of the 12 function keys for hot-key access
Automatic printing utility for function key labels
Windows 3.1 and other operating systems (OS/2, Windows NT) are not formally
supported on the OmniBook 600 by Hewlett-Packard. A best effort basis will be
made by MCD's technical staff, however, the customer will be referred to the
operating system manufacturer for further support. OS/2 does not run on the
OmniBook 600 at this time.
Physical security from Kensington Lock
System password: When the password setting is enabled, a window shall pop-up
to allow the user to enter the old password, enter a new password and to verify the
new password. When no password is currently in use, the Old Password field is
disabled. To provide both security and convenience, the user can specify whether
a power-on password is required. When enabled, the unit will prompt for password
at turn-on (either after boot or restore from disk). If the user forgets the system
password, there is a master password that will unlock the OmniBook. The user
must call the Mobile Computing Division Technical Support to follow a process to
unlock the OmniBook.
17