Mouse Assembly (End User Replaceable) - HP OmniBook 600CT Familiarization Manual

Mouse Assembly (End User Replaceable)

The Mouse Assembly is user replaceable on the OmniBook 600. To remove mouse assembly, push the
mouse button above the keyboard near the right side of the unit just above the On/Off key. The mouse
should partially eject out the right side of the machine. Grab the mouse and pull out firmly. The whole
assembly will detach.
To replace the mouse, insert the tab of the mouse into the slot in the back of the mouse housing. Slide the
mouse in place. It takes a firm push to get the mouse over the detent that keeps it in place
Early mice on the OmniBook 600 had some reliability problems. Check the mouse date code by extending
the mouse button assembly (pinch the mouse button assembly and lift up) and looking inside the assembly. If
the mouse has a date code earlier then 95-37 (year - week #) the mouse should be replaced even if it still
functions.
22