Table of Contents
Advertisement
VC720507MUK Rev1_Instruction Book 09/01/2014 16:55 Page 8
Using the portable steam cleaner
This function is ideal for cleaning vertical
surfaces and hard to reach places.
Ensure the cleaner is turned off by pressing the
1.
On/Off power button (15), and the plug is
disconnected from the mains supply.
If using from storage, release the power cord
2.
from the cord storage hooks
of 'Using in upright steam cleaning mode', page
6, but do not secure the power cord in the cord
holder (2)).
Release the handle
3.
cleaner
(10)
by pressing the handle release
button (8), then lift the handle out from the
handle dock (5).
Next, release the floorhead
4.
portable steam cleaner by pressing the
floorhead release button (23), then pull the
floorhead out from the steam outlet
bottom of the portable steam cleaner.
Attach the shoulder strap
5.
shoulder strap hooks
steam cleaner, ensuring they are securely
attached.
Warning
WARNING: Switch OFF and unplug before
changing nozzles. After use, nozzles will be
very hot, allow to cool before handling.
8
(4)
(3 & 6)
(see step 3
(1)
from the portable steam
(22)
from the
(21)
on the
(37)
to both of the
(7 & 26)
on the portable
Attach the extension hose
6.
extension hose connector
outlet on the bottom of the portable steam
cleaner. Guide the ridge on the extension hose
connector into the groove inside the steam outlet.
Attachments
(34, 38, 39 & 40)
7.
firmly onto the nozzle end of the extension hose.
NOTE: The portable cleaner is designed to be
carried by hanging the shoulder strap over your
shoulder. Ensure the cleaner body remains
upright throughout use (as shown - the arrows
denote the direction of the steam flow) - this will
enable it to produce steam correctly. Holding
the steamer horizontally or upside down may
prevent steam from being produced, or
alternatively being emitted directly at your body.
At the start of each use, water may drip from the
extension hose - this is normal.
Never block any nozzle eg by holding against a
surface being cleaned.
Only ever use demineralised, deionised or
distilled water to prevent limescale forming.
(33)
by pushing the
(32)
into the steam
can now be pushed
Advertisement
Table of Contents
