To Activate Full Touch Pad Capabilities - HP OmniBook 4100 Reference Manual

To activate full touch pad capabilities

The built-in pointing stick driver supports only basic touch pad features. To activate
full touch pad capabilities, you have to
• Select a new mouse driver and remove the pointing stick driver.
• Disable the pointing stick.
• Install touch pad support.
Select a new mouse driver and remove the pointing stick driver
1. From the Start menu, click Settings, Control Panel.
2. Double-click Add/Remove Programs and remove IBM TrackPoint Support.
3. Double-click Mouse, then click General.
4. Click Change and then select Show All Devices.
5. Under Manufacturers, click Standard Mouse Types.
6. Under Models, change the mouse type to Standard PS/2 Port Mouse, then click
OK.
Disable the pointing stick
1. From the Start menu, shut down, then restart the OmniBook.
2. When you see the HP logo, press F2 to enter the BIOS Setup utility.
3. Select the System Devices menu.
4. Highlight Internal Pointing Devices and select Touch Pad.
5. Press F10 to save and exit.
Install touch pad support
•
Run C:\Omnibook\Drivers\Win95\Touchpad\Setup.exe.
•
. Run C:\Omnibook\Drivers\Nt40\Touchpad\Install.exe.
Operating the OmniBook
Using the OmniBook Pointing Devices
1-33