Table of Contents
Advertisement
TD-W8960N
Note:
Only Open or Shared authentication method support wireless bridge, you should choose
"Wireless" "Security" to change authentication method to "open" or "shared" mode first.
4.5.5 Advanced
Choose "Wireless" "Advanced", you will see the screen of Wireless--Advanced settings shown
as below.
Channel: Select the channel you want to use from the drop-down List. This field determines
which operating frequency will be used. It is not necessary to change the wireless channel
unless you notice interference problems with another nearby access point.
Mode: In the drop-down list you can select "11b", "11bg", "11bgn" and "11n only". "11bgn"
allows both 802.11b, 802.11g and 802.11n wireless stations to connect to the Router.
Bandwidth: Select the Bandwidth you want to use from the drop-down List. If bigger
bandwidth is selected, device could transmit and receive data with higher speed.
Control Sideband: If bigger bandwidth is selected, this option will allow you select the
Control Sideband you want.
300Mbps Wireless N ADSL2+ Modem Router User Guide
Figure 4-92
Figure 4-93
75
Advertisement
Table of Contents
