Advertisement
This guide provides a brief introduction to Deco Whole Home Hybrid Mesh Wi-Fi System and the Deco app, as well as regulatory information.
Please note that features of Deco may vary slightly depending on the model and software version you have, and on your location, language and internet service provider. All images, parameters and descriptions documented in this guide are used for demonstration only.
In this guide, the following conventions are used:
Convention | Description |
Deco | Stands for Deco Whole Home Hybrid Mesh Wi-Fi System/Unit. |
Note: | Ignoring this type of note might result in a malfunction or damage to the device. |
Tips: | Indicates important information that helps you make better use of your device. |
Each Deco has an LED that changes color according to its status, two RJ-45 Ethernet ports and a power slot. See the explanation below:
Yellow pulse:
Deco is resetting.
Yellow solid:
Deco is starting up.
Blue pulse:
Deco is ready for setup.
Blue solid:
Deco is setting up.
Green pulse:
Deco is upgrading firmware.
Green solid:
Deco is registered and all is well.
Red pulse:
Deco is disconnected from main Deco.
Red solid:
Deco has an issue.
Ethernet Ports: For connecting Deco to your modem, the Ethernet outlet or other internet devices.
Reset Button: Press to reset Deco to factory default settings.
Power Slot: For connecting Deco to the power socket via the provided power adapter.
The LED on the power adapter indicates the power line backhaul network status:
LED | Indication |
Green | The power line backhaul network is in good condition. |
Orange | The power line backhaul network is in poor condition or it is not established. |
Follow the steps below to set up your Deco Whole Home Hybrid Mesh Wi-Fi system.
or
After you successfully set up your Deco network, you will see the dashboard of the Deco app. Here you can view the working status of all Decos, test the internet speed, check the connected devices and manage your network.
Devices
Tab Internet icon to check Deco status
Tab the yellow icon to display more features
Customize the network name and password of your main network or create a separate network just for guests. You can set a guest network name and an easy-to-remember password. You can shake your device to share the network details easily with family and friends.
Enable Guest Network
Create Network Name and Password
Shake to Share
Create profiles for family members and specify the devices that belong to each. Set individualized parental controls including when and for how long each person can access the internet. Block inappropriate content and pause the internet if necessary.
Insights
Filter Level
Time Controls
There are three ways Deco ensures your home network remains safe: by blocking malicious websites, by protecting the system and applications against external attacks and eliminating vulnerabilities, and by preventing infected devices from sending sensitive information outside your network.
Protection Enabled
Alert History
Protection Disabled
There are two ways to use the QoS (Quality of Service) function. You can prioritize the connection of a particular device for a set duration, such as a family member's laptop for one hour during a video call. You can also prioritize the online activity that's most important to the whole family, such as Streaming or Gaming.
Prioritize a Device
Prioritize an Activity
Customize
Additional features are available under the Advanced menu. You can modify WAN settings (IPv4 & IPv6), configure LAN parameters, control Deco's LED and turn notifications off and on, easily create a domain name for your Deco, set up port forwarding rules to make your local computers accessible to other devices over the internet, reserve the same IP address for a specific device, and change the working mode.
IPv4
IPv6
LED Control
Register a TP-Link DDNS domain name
Enable or disable TP-Link DDNS feature
Set up port forwarding rules
Reserve IP addresses for specific devices
Turn on/off notifications
Change the working mode
TP-Link is dedicated to improving product features and providing a better customer experience. Update Deco when prompted in the Deco app.
Update Available
Updating Deco
Up-to-date
Add friends and family members to help manage your network. Each manager should have their own TP-Link ID.
Add as Manager
Manager List
Maximum wireless transmission rates are the physical rates derived from IEEE Standard 802.11 specifications. Range, coverage, and maximum quantity of connected devices are based on test results under normal usage conditions. Actual wireless data throughput. wireless coverage, and quantity of connected devices are not guaranteed and will vary as a result of
A basic TP-Link HomeCareTM, powered by Trend MicroTM, package is included for 3 years from date of activation at no additional cost. It includes Parental controls, Quality of Service, and Antivirus. Deactivation of HomeCareTM will disable certain controls and protections. For a complete list of HomeCareTM functions, go to www.tp-link.com.
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Download TP-Link Deco P7 - AC1300+AV600 Hybrid Mesh Wi-Fi System Manual
Advertisement
Thank you! Your question has been received!
Need Assistance?
Do you have a question about the Deco P7 that isn't answered in the manual? Leave your question here.