Table of Contents
Advertisement
TD-W8960N
4.7.6 Access Control
Choose "Management" "Access Control" "Password", you can see the screen (shown in
Figure 4-108) which allows you to change the factory default password of the Router. The default
password is the same as the user name, which is admin/admin, support/support, and user/user
respectively.
To change the password:
1.
Select the Username whose password you want to change.
2.
Enter the Old Password in the text box.
3.
Enter the New Password and Confirm Password. The Confirm Password should be the
same as the New Password.
4.
Click Save/Apply to make your change take effect.
Note:
1) Access to your DSL Modem Router is controlled through three user accounts: admin, support,
and user. The user name "admin" has unrestricted access to change and view configuration of
your DSL Modem Router. The user name "support" is used to allow an ISP technician to
access your DSL Modem Router for maintenance and to run diagnostics. The user name
"user" can access the DSL Modem Router, view configuration settings and statistics, as well
as, update the Router's software.
2) Both of admin and support accounts can do remote management. For security reasons,
please change the default password for these two accounts when remote access function is
enabled.
300Mbps Wireless N ADSL2+ Modem Router User Guide
Figure 4-107
Figure 4-108
84
Advertisement
Table of Contents
