Wireless Advanced - TP-Link TL-WR1043ND User Manual

4.6.4

Wireless Advanced

Choose menu "Wireless→Wireless Advanced", and then you can configure the advanced
settings of your wireless network.
Transmit Power - Here you can specify the transmit power of router. You can select

High, Middle or Low which you would like. High is the default setting and is
recommended.
Beacon Interval - Enter a value between 20-1000 milliseconds for Beacon Interval here.

The beacons are the packets sent by the router to synchronize a wireless network.
Beacon Interval value determines the time interval of the beacons. The default value is
100.
RTS Threshold - Here you can specify the RTS (Request to Send) Threshold. If the

packet is larger than the specified RTS Threshold size, the router will send RTS frames
to a particular receiving station and negotiate the sending of a data frame. The default
value is 2346.
Fragmentation Threshold - This value is the maximum size determining whether

packets will be fragmented. Setting the Fragmentation Threshold too low may result in
TL-WR1043ND
Figure 4-24 Wireless Advanced
-41-
300Mbps Wireless N Gigabit Router