TP-Link TL-WR1043ND User Manual page 23

IP Address - This is the WAN IP address as seen by external users on the Internet

(including your ISP). Your ISP will provide you with the IP address you need to enter
here. Enter the IP address into the field.
Subnet Mask - The Subnet Mask is used for the WAN IP address. Your IPS will provide

you with the subnet mask which is usually 255.255.255.0.
Default Gateway - Your ISP will provide you with the Gateway address which is the ISP

server's address. Enter the gateway IP address into the box if required.
Primary DNS - Enter the DNS Server IP address into the box if required.

Secondary DNS - If your ISP provides another DNS server, enter it into this field.

c) If the connection type is PPPoE, the next screen will appear as shown in Figure 3-8.
Configure the following parameters and then click Next to continue.
User Name/Password - Enter the User Name and Password provided by your ISP.

These fields are case-sensitive. If you have difficulty with this process, please contact
your ISP.
Confirm Password - Enter the password again to make sure that the password is

correct.
d) If the connection type is L2TP, the next screen will appear as shown in Figure
3-9.Configure the following parameters and then click Next to continue.
TL-WR1043ND
Figure 3-8 Quick Setup – PPPoE
Figure 3-9 Quick Setup – L2TP
-13-
300Mbps Wireless N Gigabit Router