TP-Link TL-WR1043ND User Manual page 25

Confirm Password - Enter the password again to make sure that the password is

correct.
Select Static IP if IP Address/ Subnet Mask/ Gateway and DNS server address have been
provided by your ISP. Then please enter server IP address or domain name provided by your
ISP, and also enter the corresponding parameters.
Select Dynamic IP if none of the above parameters are provided. Then you just need to enter
server IP address or domain name provided by your ISP.
4. Click Next to continue, the Wireless settings page will appear as shown in Figure 3-11.
Wireless Radio - Enable or disable the wireless radio by choosing from the drop-down

list.
Wireless Network Name - Enter a value of up to 32 characters. The same name of

SSID (Service Set Identification) must be assigned to all wireless devices in your
TL-WR1043ND
Figure 3-11 Quick Setup – Wireless
-15-
300Mbps Wireless N Gigabit Router