A dialog box will prompt you for
the Username and Password.
Enter the default values and click
OK.
Username: admin
Password: admin
Click OK
If the dialog box does not pop up, please refer to T3 in the Troubleshooting
Note
guide. T2 will give you some help if you forget the password.
Network Setting
After successfully logging in, this
page will then display.
You may need to change the
LAN IP address and the
gateway according to your
network.
Click Network
Click Save after you
have completed this
settings
If you have changed the LAN IP address, please log in to the Access Point
Note
using the new IP address.
3