TP-Link TL-WA500G Installation Manual page 8

The AP List page will then pop up
in a new window.
Find the SSID of another bridge, and
click Connect in the corresponding
row
The BSSID of the remote bridge
will be automatically filled into the
MAC of AP box
Click Save at the bottom of this page. Your setup is now complete.
Please make sure all the bridges are set to operate in the same channel
Note
with different LAN IP address. The Access Points can also send the wireless
signal to the wireless LAN clients if the "With AP mode" option is ticked. For
instructions in Point to Multi-Point Bridge mode, please refer to the User
Guide on the resource CD.
8