Bridge Mode - TP-Link TL-WA500G Installation Manual

Bridge Mode

In this mode, the Access Point can wirelessly connect two or more remote LANs
together.
Operation Mode Setting
To choose the Operation
Mode, please click Wireless
Click Wireless Mode
Choose the Operation Mode
appropriate to your needs.
If Access Point mode is selected,
please proceed to part A;
If Repeater M ode is selected,
please skip to part B;
If Client mode is selec
skip to part C;
If Bridge m ode is selected,
please skip to part D.
If the wireless security is required, please refer to the Appendix A: Wireless
Note
Security Setup to configure the Access Point after finishing the following
operation mode settings.
ted, please
5