Appendix B: With Poe Setup - TP-Link TL-WA500G Installation Manual

Appendix B: With PoE Setup

T urn off all your network devices,
in cluding your computer(s), powe
injector and the AP.
Connect your computer to the
LAN port on the power injector
with an Ethernet Cable.
Connect your AP to the PoE port
on the power injector with an
Ethernet Cable.
Plug the provided power adapter
into the DC jack on the power
injector, and the other end to a
standard electrical wall socket.
1. Passive PoE Injector supports a maximum cable length up to 30 meters
Note
due to the environment.
2. For longer powered cable up to 100 meters, please choose TP-LINK's
48V PoE adapters: TL-POE200 or TL-POE150S & TL-POE10R.
Product information can be found on our official website
http://www.tp-link.com.
r
12