What To Do If - Zanussi ZCG551 User Manual

Cooker
Hide thumbs Also See for ZCG551:
Table of Contents

Advertisement

2. Clean the glass cover.
3. Replace the oven lamp with an applicable
300 °C heat-resistant oven lamp.

What to do if...

Warning! Refer to the Safety chapters.
Problem
The appliance does not operate.
The appliance does not operate.
The grill, burners, ovens and timer
do not work.
The grill, burners, ovens and timer
do not work.
The grill, burners, ovens and timer
do not work.
Only main oven does not work.
There is no spark when lighting
the gas.
The flame is blow out immediately
after ignition.
The gas ring burns unevenly.
The oven does not heat up.
The oven does not heat up.
The oven does not cook evenly.
The oven lamp does not operate.
The display shows "12.00" and
"LED".
20
Important! Use the same oven lamp type.
4. Install the glass cover.
Possible cause
The fuse in the fuse box is re-
leased.
The appliance is too hot.
There is no electrical supply.
There is no electrical supply.
There is no gas supply.
Time is not set.
Burner cap and crown are placed
uneven.
Thermocouple is not heated suffi-
cient.
Burner crown is blocked with food
residue.
The oven is not switched on.
The necessary settings are not
set.
The oven lamp is defective.
A power cut.
Remedy
Control the fuse. If the fuse is re-
leased more than one time, refer
to a qualified electrician.
Cool down the appliance for some
hours
Make sure that the unit is connec-
ted and the electrical supply is
switched on.
Examine the house electrical in-
stallation fuse.
Examine the house gas supply,
use other gas appliance (Central
heating or gas fires).
Set the time
Make sure that the burner cap and
crown are in correct positions.
After lightning the flame, keep the
knob pushed for approximately 5
seconds.
Make sure that the injector is not
blocked and the burner crown is
clear of food particles or cleaning
fluids. Dry them with a cloth and
clean stubborn marks away with a
dry nylon brush (for example an
old toothbrush).
Switch on the oven.
Control the settings.
Check that the appliance is cor-
rectly installed and levelled, and
that you use the recommended
temperatures and shelf positions.
Replace the oven lamp.
Reset the clock.
www.zanussi.com

Advertisement

Table of Contents
loading

Table of Contents