What To Do If - Zanussi ZCV621 User Manual

3. Remove the glass panels.
2
1
To replace the glass panels obey the pro-
cedure in opposite sequence. Before you
lower the trim attach the A trim part to the door.
Refer to picture.
Oven lamp

What to do if...

Warning! Refer to the Safety chapters.
Problem
The residual heat indicator does
not come on
The appliance does not operate
The oven does not heat up
The oven does not heat up
The oven lamp does not operate
Steam and condensation settle on
the food and in the oven cavity
www.zanussi.com
A
Possible cause
The cooking zone is not hot be-
cause it operated only for a short
time
The fuse in the fuse box is re-
leased
The oven is not switched on
The necessary settings are not set
The oven lamp is defective
You left the dish in the oven for
too long
Warning! There is a danger of electrical
shock!
Before you change the oven lamp:
• Switch off the oven.
• Remove the fuses in the fuse box or switch
off the circuit breaker.
Put a cloth on the bottom of the oven for
protection of the oven light and glass cov-
er.
Replacing the oven lamp
1. You can find the lamp glass cover at the
back of the cavity.
Turn the lamp glass cover counterclock-
wise to remove it.
2. Clean the glass cover.
3. Replace the oven lamp with an applicable
300 °C heat-resistant oven lamp.
Important! Use the same oven lamp type.
4. Install the glass cover.
If the cooking zone must be hot,
speak to the after sales service
Control the fuse. If the fuse is re-
leased more than one time, refer
to a qualified electrician.
Switch on the oven
Control the settings
Replace the oven lamp
Do not leave the dishes in the
oven for longer than 15-20 mi-
nutes after the cooking process
ends
Remedy
15