Turning On The Overlays; Temporarily Using Normal Keyboard (Overlay On) - Toshiba TE2000 User Manual

Turning on the overlays

The numeric keypad overlay can be used for numeric data input or cursor
and page control.
Arrow mode
To turn on the Arrow mode, press Fn + F10. The Arrow mode indicator
lights. Now try cursor and page control using the keys shown in the figure
below. Press Fn + F10 again to turn off the overlay.
Numeric mode
To turn on the Numeric mode, press Fn + F11. The Numeric mode
indicator lights. Now try numeric data entry using the keys in the figure
below. Press Fn + F11 again to turn off the overlay.

Temporarily using normal keyboard (overlay on)

While using the overlay, you can temporarily access the normal keyboard
without turning off the overlay:
1. Hold Fn and press any other key. All keys will operate as if the overlay
were off.
2. Type uppercase characters by holding Fn + Shift and pressing a
character key.
3. Release Fn to continue using the overlay.
TOSHIBA TE2000
The numeric keypad overlay
The Keyboard
5-7