Sound System; Tv Output Signal - Toshiba TE2000 User Manual

Sound system

Problem
No sound is heard

TV output signal

Problem
Display on TV is
poor
No display
If you turn the computer off in Resume mode while the display is on TV,
the computer will select either the internal LCD or an external computer
CRT as the display device.
TOSHIBA TE2000
Procedure
Adjust the volume control dial.
Check the software volume settings.
Make sure the headphone connection is secure.
Check Windows Device Manager. Make sure the
sound function is enabled and that settings for
I/O address, Interrupt level and DMA are correct
for your software and do not conflict with other
hardware devices that you may have connected
to the computer.
If problems persist, contact your dealer.
Procedure
Make sure the TV type is correct for your area:
NTSC (US, JAPAN), PAL (Europe).
Try adjusting the contrast and brightness
controls on the external monitor.
Press hotkeys Fn + F5 to change the display.
Refer to Chapter 5, Keyboard.
If problems persist, contact your dealer.
Troubleshooting
9-17