TOSHIBA TE2000
HW Setup and Passwords
This chapter explains how to use the TOSHIBA HW Setup program to
configure your computer and how to set passwords.
HW Setup
TOSHIBA HW Setup lets you configure settings for pointing devices,
display, CPU, boot priority, keyboard, USB, LAN, general, password,
device config and parallel/printer.
If the supervisor password is set, access to the TOSHIBA HW Setup
program can be prevented when the user password is used to log on to
the computer.
Refer to the Supervisor password readme file for details on
enabling/disabling access to HW Setup. The path to the readme file is
C:\ProgramFiles\TOSHIBA\Windows Utilities\SVPWTool. In the
SVPWTool directory, open the readme.htm file.
Accessing HW Setup
If you are using Windows
TOSHIBA HW Setup to run HW Setup.
If you are using Windows
Control Panel and select TOSHIBA HW Setup to run HW Setup.
User's Manual
TOSHIBA TE2000
Chapter 7
®
XP, click start, click Control Panel and select
®
2000, click Start, point to Settings, click
HW Setup and Passwords
7-1
7-1