Manual Installation - Technicolor TG587n v3 Setup And User Manual

3 Manual Installation

Installation
This chapter will help you to manually install your Technicolor Gateway.
Setting up your network
Proceed as follows:
1 Connect your Technicolor Gateway to your service provider's network.
For more information, see
2 Power on the Technicolor Gateway.
For more information, see
3 Connect your computer to the Technicolor Gateway.
For more information, see
4 Configure your Technicolor Gateway.
For more information, see
5 Share your content or media on your local network, continue with
page 49.
6 If you purchased the mobile USB adapter, setup the 3G backup connection.
For more information, see
7 Once you successfully installed your Technicolor Gateway, it is recommend to backup your configuration. This will allows
you to return to this configuration when needed (for example, after misconfiguration). For more information, see
"4.2 Backing Up/Restoring your Configuration" on page
DMS-CTC-20101206-0017 v1.0
"3.1 Connecting the Technicolor Gateway to your Service Provider's Network" on page
"3.2 Powering on the Technicolor Gateway" on page
"3.3 Connecting Your Network Devices to the Technicolor Gateway" on page
"3.4 Configure the Technicolor Gateway" on page
"3.5 Setting Up the 3G Fall-Back WAN Connection" on page
37.
3 MANUAL INSTALLATION
22.
26.
"7 Sharing Content on your Technicolor Gateway" on
27.
18.
23.
17