Technicolor TG587n v3 Setup And User Manual page 83

Option 1: content-based filter (combined with the address-based filter)
If you want to use the content-based filtering:
1 Browse to the Technicolor Gateway
2 On the Toolbox menu, click Parental Control.
3 On the Navigation
4 Make sure that the Use Content-Based Filter check box is selected.
5 Configure the content-based filter. For more information, see
6 If you want to make exceptions for specific web sites, add the necessary rules in the address-based filter. For more
information, see
Option 2: address-based filter only
Take this option if content filtering is not available on your Technicolor Gateway or you don't want to use it.
To configure address-based filtering:
1 Browse to the Technicolor Gateway
2 On the Toolbox menu, click Parental Control.
3 On the Navigation
4 Make sure that the Use Address-Based Filter check box is selected.
5 In the Action for Unknown Sites, select:
Allow as the default rule if you want to allow access to all web sites and manually specify which web sites may not be

accessed.
 Block as the default rule if you want to deny access to all web sites and manually specify a number of web sites that
may be accessed.
6 Click Apply.
7 If you want to make exceptions for specific web sites, add the necessary rules in the address-based filter.
For more information, see
DMS-CTC-20101206-0017 v1.0
GUI.
bar, click Configure.
"9.1.2 Adding Rules for Address-Based Filtering" on page
GUI.
bar, click Configure.
"9.1.2 Adding Rules for Address-Based Filtering" on page
9 INTERNET SECURITY
"9.1.1 Configuring Content-based Filtering" on page
79.
79.
78.
77