ADTRAN Express 3000 SP User Manual page 92

Appendix B. Status Buffer Messages
Bad AT numeric
User issued an AT command with an argument that was out
of range.
Bad call type
Express 3000 SP placed a call with an improper call type.
Bad DTE Baud
The DTE bit rate does not match a valid bit rate for the proto-
col selected.
BAD_INFO_ELEM
Call control error.
Bad phone number
Express 3000 SP attempted to call an invalid phone number.
BEAR_CAP_NOT_AVAIL
The bearer channel requested is not available.
BEARER_CAP_NOT_AUTH
Bearer capability requested is not authorized.
Bearer Mode?
Incoming call is not of a type the Express 3000 SP can accept.
Bearer Info Cap?
Incoming call information transfer capability is not known.
BONDING (+/-XXX)
The amount of bytes or corrected delay between the B2 and B1
Bearer channels (XXX can range from -8000 to +8128).
BPS mismatch
Bonding negotiation found a bit rate mismatch.
Break to AT cmd
User issued a break-in request.
Break ignored
User issued an extra break-in request.
B-2 Express 3000 SP User Manual 61203153L3-20