Table of Contents
Advertisement
Chapter 3. Using the Express Configuration Program
The Express 3000 SP uses Bandwidth Allocation Control Protocol
(BACP), if supported by your ISP, to bring up and down the second
channel of a multilink call. To disable this feature, select the appropri-
ate checkbox: profile setup / General / Disable BACP.
Remote Access Protocols
Check with your systems administrator to determine which remote
access protocol to use.
Using Profiles
To use profiles, open the Express Configuration program. Then select
either isdn setup (ISDN profile) or profile setup (User profile). Figure
3-3 on page 3-7 shows the window that opens for an ISDN profile, and
Figure 3-4 on page 3-9 shows the window that opens for a User profile.
These windows contain function buttons and parameter tabs. Step-by-
step instructions for using the function buttons begin on page 3-17.
Parameter tabs are described below.
ISDN Profile Window
The ISDN profile window contains two tabs: General and Preview.
The General tab contains fields for setting parameters. The Preview
tab lists information about the profile shown in the Name box.
Figure 3-3. ISDN Profile Setup Window
61203153L3-20
Express 3000 SP User Manual
3-7
Advertisement
Table of Contents
