Table of Contents
Advertisement
1.
Prepare the computer for disassembly
2.
Remove the access panel
3.
Move any cables aside that interfere with removing the memory modules.
4.
Open both latches of the memory module socket (1), and insert the memory module into the
socket (2).
Figure 5-4
Installing a DIMM
5.
Push the module down into the socket, ensuring that the module is fully inserted and properly
seated. Make sure the latches are in the closed position (3).
6.
Repeat steps 4 and 5 to install any additional modules.
7.
Replace the access panel.
8.
If the computer was on a stand, replace the stand.
9.
Reconnect the power cord and turn on the computer.
10.
Lock any security devices that were disengaged when the access panel was removed.
The computer should automatically recognize the additional memory the next time you turn on the
computer.
(Preparation for Disassembly on page
(Access Panel on page
23).
22).
27
Advertisement
Table of Contents
