Table of Contents
Advertisement
Country-Specific Requirements
Additional requirements specific to a country are shown in parentheses and explained below.
Country
Australia (1)
Austria (1)
Belgium (1)
Canada (2)
Denmark (1)
Finland (1)
France (1)
Germany (1)
1.
The flexible cord must be Type HO5VV-F, 3-conductor, 0.75mm
coupler and wall plug) must bear the certification mark of the agency responsible for evaluation in the country where it
will be used.
2.
The flexible cord must be Type SVT or equivalent, No. 18 AWG, 3-conductor. The wall plug must be a two-pole
grounding type with a NEMA 5-15P (15A, 125V) or NEMA 6-15P (15A, 250V) configuration.
Appliance coupler, flexible cord, and wall plug must bear a ―T‖ mark and registration number in accordance with the
3.
Japanese Dentori Law. Flexible cord must be Type VCT or VCTF, 3-conductor, 0.75 mm
be a two-pole grounding type with a Japanese Industrial Standard C8303 (7A, 125V) configuration.
Accrediting Agency
EANSW
OVE
CEBC
CSA
DEMKO
SETI
UTE
VDE
Country
Accrediting Agency
Italy (1)
IMQ
Japan (3)
METI
Norway (1)
NEMKO
Sweden (1)
SEMKO
Switzerland (1)
SEV
United Kingdom (1)
BSI
United States (2)
UL
conductor size. Power cord set fittings (appliance
2
conductor size. Wall plug must
2
95
Advertisement
Table of Contents
