Install the Motherboard
Follow the steps below in order to perform the installation of your new SY-P4VDA Motherboard.
Install the CPU
Step 1.
Mark your CPU Frequency:
should be clearly marked on the CPU cover.
FSB 400MHz
1. 5 GHz (100 x 15. 0 )
1. 9 GHz (100 x 19. 0 )
CPU Mount Procedure:
have purchased separately, follow these instructions.
1 1
1.
Lift the socket handle up to a vertical position.
2.
Align the blunt edge of the CPU with the matching pinhole edge on the socket.
3.
Seat the processor in the socket completely and without forcing.
4.
Then close the socket handle to secure the CPU in place.
Remember to connect the CPU Cooling Fan to the appropriate power connector on
the Motherboard. The fan is a key component that stabilizes the system. It prevents the
equipment from overheating and prolongs the life of your CPU.
SY-P4VDA Quick Start Guide
Record the working frequency of your mPGA CPU that
1. 6 GHz (100 x 16. 0 )
2. 0 GHz (100 x 20. 0 )
2. 2 GHz (100 x 22.0)
®
To mount the Pentium
3
7
1. 7 GHz ( 100 x 17. 0 )
1. 8 GHz (100 x 18. 0 )
4 Socket mPGA478 processor that you
2
4