Advertisement
SY-6BA+100 Quick Start Guide
Install the Motherboard
Follow the steps below in order to perform the installation of your new SY-6BA+100 Motherboard.
Install the CPU
Step 1.
Mark your CPU Frequency:
that should be clearly marked on the CPU cover.
FSB 66MHz
266MHz (66 x 4.0)
300MHz (66 x 4.5)
FSB 100MHz
350MHz (100 x 3.5)
400MHz (100 x 4.0)
450MHz (100 x 4.5)
CPU Mount Procedure:
separately, follow these instructions.
Retention Module
Step 2.
Insert the CPU into the retention
module. The CPU fits in the CPU
slot in only ONE way, do not try to
force it in.
Note: Installing a heat sink and cooling fan on top of your CPU is necessary for proper heat
dissipation. Failing to install these items may result in overheating and possible burn-out of
your CPU.
Record the working frequency of your CPU
333MHz (66 x 5.0)
366MHz (66 x 5.5)
500MHz (100 x 5.0)
650MHz (100 x 6.5)
550MHz (100 x 5.5)
700MHz (100 x 7.0)
600MHz (100 x 6.0)
750MHz (100 x 7.5)
To mount the processor that you have purchased
Step 1.
Step 3.
6
400MHz (66 x 6.0)
466MHz (66 x 7.0)
433MHz (66 x 6.5)
800MHz (100 x 8.0)
Open the two sides by folding them up.
After completely inserting the CPU,
Now your CPU is ready for use.
Advertisement
