Install the Motherboard
Follow the steps below in order to perform the installation of your new SY-P4VSA Motherboard.
Install the CPU
Step 1.
Mark your CPU Frequency:
CPU that should be clearly marked on the CPU cover.
FSB 400MHz
1.5GHz (100 x 15.0 )
1.9GHz (100 x 19.0 )
CPU Mount Procedure:
that you have purchased separately, follow these instructions.
1 1
1.
Lift the socket handle up to a vertical position.
2.
Align the blunt edge of the CPU with the matching pinhole edge on the socket.
3.
Seat the processor in the socket completely and without forcing.
4.
Then close the socket handle to secure the CPU in place.
Remember to connect the CPU Cooling Fan to the appropriate power
connector on the Motherboard. The fan is a key component that stabilizes the
system. It prevents the equipment from overheating and prolongs the life of
your CPU.
SY-P4VSA Quick Start Guide
Record the working frequency of your mPGA
1.6GHz (100 x 16.0)
2.0GHz (100 x 20.0)
To mount the Pentium
3
7
1.7GHz ( 100 x 17.0)
1.8GHz (100 x 18.0)
2.2GHz (100 x 22.0)
®
4 Socket mPGA478 processor
2
4