Table of Contents
Advertisement
Install the Motherboard
Follow the steps below in order to perform the installation of your new SY-6ICA Motherboard.
Install the CPU
Step 1.
Mark your CPU Frequency:
that should be clearly marked on the CPU cover.
FSB 100MHz
350MHz (100 x 3. 5)
400MHz (100 x 4.0)
FSB 133MHz
400MHz (133 x 3.0)
466MHz (133 x 3.5)
CPU Mount Procedure:
separately, follow these instructions.
Retention Module
Step 2.
Insert the CPU into the retention
module. The CPU fits in the CPU
slot in only ONE way, do not try to
force it in.
Note: Installing a heat sink and cooling fan on top of your CPU is necessary for proper heat dissipation. Failing to
install these items may result in overheating and possible burn-out of your CPU.
Record the working frequency of your CPU
450MHz (100 x 4.5)
550MHz (100 x 5.5)
500MHz (100 x 5.0)
600MHz (100 x 6.0)
533MHz (133 x 4.0)
667MHz (133 x 5.0)
600MHz (133 x 4.5)
733MHz (133 x 5.5)
To mount the processor that you have purchased
Step 1.
Step 3.
7
SY-6ICA Quick Start Guide
Open the two sides by folding them up.
After completely inserting the CPU,
Now your CPU is ready for use.
Advertisement
Table of Contents
