Finish Tab - Konica Minolta bizhub C353 User Manual

Print functions of the PCL/PS drivers for Windows
Function name
[Image Shift Set-
tings]
Note
"Combination" provides options "2 × 2, 3 × 3, 4 × 4" to print a sheet of document into multiple sheets
of paper. The function is only for the PCL driver.
The "Skip Blank Pages" function is only for the PCL driver.
The positions of binding margins vary according to the "Binding Position" setting.
8.4.3

Finish tab

Function name
Staple
Center Staple and
Fold
Punch
Fold
Center Erase
Output Tray
Paper Arrangement
C353/C253/C203
Option
Unit
Front Side/Back Side
Option
ON/OFF
ON/OFF
ON/OFF
ON/OFF
ON/OFF
Default, Tray1-3, Bin 1-6
Prioritize Arranging Papers, Priori-
tize Productivity
Description
Selects the measurement unit that specifies the size.
Specifies the shift direction and values. For 2-sided
printing, clearing the "Same Value for Front and Back
Sides" check box allows you to set different values
between the front and back sides.
Description
Specifies stapling.
From the drop-down list, specify the number of sta-
ples and the stapling position.
Specifies to saddle stitch a printed document.
Specifies hole punching.
From the drop-down list, specify the number of
punches and the position.
Specifies folding.
When Center Staple and Fold is specified, select this
option not to print on the center fold line.
Specifies the tray where to output the printed pages.
The selectable items differ depending on the options
that are installed.
Specifies the method for adjusting the binding posi-
tion for 2-sided print. The biding position is adjusted
after receiving all data for finishing priority. The data is
received and printed for productivity priority.
8
8-10