Konica Minolta bizhub C353 User Manual page 45

Manual installation using the Add Printer wizard
4
Click "Add a printer" from the toolbar.
The Add Printer window appears.
5
Click "Add a network, wireless or Bluetooth printer".
– If the printer is not detected, turn off this machine, then on again.
– When turning off the power, then on again, wait at least 10 seconds before turning it on again.
Otherwise, this machine may not function properly.
The connected printers are detected.
6
Select this machine from the list, and then click the [Next] button.
– When using the LPR/Port9100 protocol, select the printer having its IP address.
– When using an SMB connection, select the printer having its "\\NetBIOS name\print service name".
– It may take some time to finish searching the entire list of printers.
C353/C253/C203
4
4-12