Spool Print Jobs In Hdd Before Rip - Konica Minolta bizhub C353 User Manual

Settings on the control panel
4
Touch the button for the desired setting.
12.2.4

Spool Print Jobs in HDD before RIP

You can specify whether or not a spool is used. (Default setting: ON)
- ON: When the next job is received while processing a job, the print data is stored in the HDD.
- OFF: The print data is not stored in the HDD.
Reminder
Do not change the setting to "OFF" for normal operation. Printing may fail.
!
Detail
For details on displaying the User Settings screen, refer to
page 12-2.
1
In the User Settings screen, touch [5 Printer Settings].
2
Touch [1 Basic Settings].
3
Touch [Spool Print Jobs in HDD before RIP].
C353/C253/C203
"Displaying the User Settings screen" on
12
12-7