TracVision M3/M2 User's Guide
Chapter 4 - Setup
Resetting the System to Change Setup
34
If you need to change the antenna's setup to track a different satellite,
follow the steps below to reset the system. Once the system has reset to
its factory condition, you will be able to complete an initial setup as
described earlier in this chapter.
1. Press
MENUS until the display shows
"DIAGNOSTICS."
DIAGNOSTICS= NO
NEXT MENU
2. Press
CHANGE until the display shows
"DIAGNOSTICS= YES."
DIAGNOSTICS= YES?
CHANGE
3. Press
ACCEPT to enter the Diagnostics menu.
ENTERING DIAGNOSTICS
SYSTEM RESET= NO
NEXT MENU
CHANGE
ACCEPT
CHANGE