KVH Industries Cars 2 Innotab User Manual page 23

3. Press CHANGE again. A cursor appears under the
first number in the displayed latitude.
LAT/LONG= 41N, 071W
CHANGE
4. Press CHANGE until the number is set to the first
digit of your vessel's current latitude.
5. Press ACCEPT. The cursor moves to the next number.
LAT/LONG= 51N, 071W
CHANGE
6. Repeat steps 4 and 5 to set the remaining digits (plus
North/South and East/West directions) of your
latitude and longitude. Once you have set the entire
position, the cursor disappears from the display.
LAT/LONG= 55N, 012E?
CHANGE
7. Press ACCEPT. The antenna restarts. Wait one
minute for system startup.
TracVision M3/M2 User's Guide
Chapter 3 - System Preferences
ACCEPT
ACCEPT
ACCEPT
23